UPVC Door Lock Replacement
UPVC doors are a great protection against burglaries. However, they do have a few limitations, but they can be overcome by installing a deadlock.
If door lock replacement is loose or sloppy, it might be time to change the barrel lock. This simple DIY project can increase the security of your home as well as improve its appearance.
Remove the old lock cylinder
You may have a damaged lock-cylinder if you notice that your front door feels flimsy or the key struggles to turn. It will increase security and smooth operation by replacing it. The process is simple and should take around 30 minutes. You'll require an screwdriver. To start by opening your door, look at the edge near the lock the cylinder. There should be an encapsulated screw approximately in line with bottom of the cylinder. Remove it using an screwdriver and store it in a safe place.
You'll have to know the exact size of your existing cylinder to determine a suitable replacement. The sizes typically range between 60mm and 110mm. To determine the size, first you'll have to locate the screw on the faceplate of the lock and then remove it. You can also turn the handle while the cylinder remains in place to determine the amount it moves.
The next step is to determine the cylinder cam's diameter and diameter of the cylinder. These measurements are essential to ensure that the new lock will be able to fit into the door. Based on the type of uPVC door, these dimensions can vary. You'll have to choose a replacement that is similar or slightly bigger than the cylinder that is currently in use.
Once you have the measurements and measurements, it's time for you to remove the old cylinder from the door. It's an easy task, but you must be careful to do it in a safe manner to avoid damaging your frame or door. Make sure that the door is propped up or secured so that it won't shut between steps.
If you don't want to tackle it yourself, hiring a professional locksmith is a great alternative. They can offer expert advice, flawless execution, and peace of mind. They can also aid you in choosing a secure and secure lock system. DIY is a great option to save money as well as acquire new techniques. All you need is a little patience and the right tools, like a Phillips screwdriver. It's not as difficult as you might imagine to replace your uPVC locks.
Installing the new lock cylinder
If you are replacing the lock on your front door, it's important to use the right measurements and follow the proper steps to ensure that the new one is put in the right way. This will not only help you avoid issues in the future but keep your home safe and permit you to use a key to both sides of the door. Before replacing your uPVC lock, you must take measurements of the length overall and the backset as well as cylinder diameter. These measurements will ensure that the lock cylinder can fit into the uPVC and work properly without any gaps.
The first step is to take the handle from the door by loosening it with the help of a screwdriver. Next, you need to locate the barrel screw that holds the lock in place, and then remove it. Then, you can remove the lock that was previously in place by inserting the key into the cylinder, and turning it both left and right. When the key is in one of these positions it should be able to remove the cylinder by pulling it out of its slot.
Installing the new cylinder on the front of the door is straightforward. You can follow the same procedure you followed to remove the old one. It is important to be aware that the new cylinder will not fit in the space left by the old one. The cylinder must be properly aligned in order to be locked and closed with the key. Make sure that the cylinder is in the center and has an elongated keyway.
It isn't difficult to install a new uPVC door lock, but you must be cautious not to harm the door's frames or handles. If you are uncertain about your capability to complete this project it is best to hire a professional locksmith who is Checkatrade approved and has experience working with these kinds of doors. Locksmiths can save your time and money by finishing the task efficiently and quickly.
Reattaching the door handle
You may decide to upgrade your lock on your front door for a variety of reasons. You may have lost your key, your previous tenant hasn't returned your keys, or you'd like to upgrade to more secure locks. It takes just five minutes to change the barrel of a lock on the uPVC front door. You'll need an Phillips head screwdriver, a new lock cylinder and an additional key for the cylinder (if you're planning to use one). Ensure that the door is opened or secured safely so that it doesn't close during the process.
There are a few snags to changing the uPVC front door lock mechanism, but they are not as difficult to fix as you may think. Begin by determining what kind of lock is installed on your front door, and determine the size you need to replace it. For older doors, there are strip locks and multipoint lock options. It is easier to replace your uPVC door lock if you are aware of the brand and model it is.
After replacing the cylinder you will need to reconnect the handle. First, you'll need to loosen the set screw that holds the handle's spindle shaft with either a screwdriver, or Allen key. You can then remove the handle to reveal the spindle shaft. If the shaft is threaded you'll need to loosen it up a bit and back it up using a screwdriver in order to ensure proper fit.
After you've tightened the screws on the new handle and lock cylinder, it's time to test the lock. Make sure that the key turns easily and fits properly, and the locking mechanism of the handle is functioning well. If you don't feel comfortable doing this on your own, a locksmith can do the job for you.
Be aware that uPVC lock mechanisms and door handles require regular lubrication to function properly. This is particularly true in areas of high wear and tear, like those that are frequently used or locked and shut. A small amount of lubricant goes far in ensuring that they function correctly and extend their lifespan.
Testing the new lock
A lock made of upvc is a crucial element of the security of your home. But, just like any other device, it can wear out over time or even be damaged. Regular maintenance is the key to a properly functioning uPVC locking system. This will stop malfunctions from occurring and compromising the security of your home. This can be achieved by lubricating internal mechanisms every six months with an approved oil. This will ensure that the lock is running smoothly and stop it from rusting or getting damaged.
In addition to the normal fluid, you could also make use of a silicon-based spray loosen the keyway and make it easier to insert the key. This is a quick DIY solution that will help you save money over time. Make sure you don't use WD-40because it will leave oil residue that could potentially damage the lock.
It is essential to test the new cylinder following installation before you assume it will work correctly. You can do this by testing the handle both from inside and outside the door. If everything is in order, you can then put the handles back into position and re-insert them into the spindle screw. Replace all screws that were holding the handles in place. Give yourself a pat on the back for a good job!
If you're looking to improve your home's security, a locksmith can install additional features, including sash jammers or door chains. They can even help you choose the right lock for your home. A professional can assist you in determining what size of cylinder is best for your doors. This is crucial since a wrong lock could compromise your security.
The cost of replacing the uPVC door lock may vary depending on the kind of lock you select and the number of doors that require replacement. The average cost for a professional locksmith is between PS75 and PS100 per hour. However, this price can change depending on where you live and what type of lock you require. Compare locksmith costs before settling on a firm.